In the future, I just need to press the index finger on the main screen. The next step is the blue spider web. The fingerprint on the screen is so magical. Although this design is very cool, the mainstream mobile phone manufacturers first made it. The world's first mobile phone with a built-in fingerprint scanner for the display should be made by Apple or Samsung, but this time it was a surprise. In the past few months, many people have been expecting the screen fingerprint recognition technology not appearing on this iPhone.
This vent was snatched by Vivo. On the ces, vivo showed the phone, indicating that it will be mass-produced in the future, but the phone still has no official name, and the specific price and sales date have not been announced. In fact, the fingerprint sensor made by sensor company SynapTIcs is located under a 6-inch OLED display. This is what you really look at the "screen" under the glass. You can see it in our photo.
When your fingertips touch the screen, the sensor array turns on the display to light your finger and only shows your finger. The image you print will go to the optical image sensor at the bottom of the display.
From the technical principle of fingerprint recognition, optical, capacitive, thermal and ultrasonic are four common methods of fingerprint recognition. On electronic devices such as mobile phones and tablets, compact and low-cost capacitive modules are the first choice of most consumer electronics manufacturers.
Then train through an artificial intelligence processor to identify 300 different features of your finger, such as how close your finger ridges are. This is different from the phones that most readers use today.
SynapTIcs showed the Vivo phone at a crowded booth behind an intermittent corridor. He said the fingerprint reader won't pick up more batteries by illuminating your fingers and promises that its power management is equivalent to industry standards.
Because the cost of new technologies is higher, as the components become more complex, such technologies first hit high-end phones. And Vivo's mobile phone is the first company we saw in real life to apply this technology, it is still a bit unexpected.
The CAT6A 10Gig UTP modular jacks provide transmission performance beyond 500MHz and Alien Crosstalk requirements exceeding the industry standards set by ANSI/TIA-568-C.2 for supporting the operation of 10Gig Ethernet applications (10GBASE-T). It is designed with a shielded termination cap which minimizes additional AXT from neighboring connectors. It also features twisted pair separation posts which minimize the untwisting of pairs to allow for efficient installation and long-term peak performance. The modular jacks are also backward compatible supporting current CAT6, CAT5e, and voice network applications.
CAT6A Keystone Jack,Keystone Jack CAT6A,Cat6a Jack,Keystone 6a
NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uonicore.com