Super-detailed graphics tutorials How to restore factory settings for PPTV TVs and boxes?

How to restore factory settings properly

Includes PPTV TV, PPBOX 4K box,

And PPBOX mini box

The focus has come

↓↓↓↓

This operation is aimed at the failure of [red light does not boot], [boot black screen], [boot blue screen], [crash/card stuck in boot interface], [remote control cannot be used], [network failure], and so on. You can try to restore the factory version. To eliminate system problems. (How to restore to the original system after upgrading, the big P will be mentioned later)

1 Factory Reset for PPTV 32C2/40C2 TV

* The following tutorial, PPTV series TV universal ~

Specific steps

Step 1: Turn off the PPTV TV, make the TV stand by, and then unplug the power plug;

Step 2: Find the “Five-way key” on the back of the machine (as shown in the figure below), push the five-way key up and hold it, plug in the power plug at the same time, and turn on the power ▼

The third step: the screen jumps out of the progress bar shows that when the upgrade (as shown below), and then release the "five-way key" "focus on the picture in the red word prompt part", the TV will automatically enter the factory version mode â–¼

Step 4: The system automatically runs through the brush and restarts automatically.

Step 5: Reset, Networking â–¼

Step 6: After the setting is completed, check the latest system version "Path: Settings - System Information".

PPTV 32C2/40C2 restore the factory operation is so simple, according to the above steps, you can make the TV "refreshing" it.

2 PPBOX 4K box restore factory settings

Specific steps

1. Unplug the power cord of the PPBOX 4K box first;

2. Use a mobile phone thimbles to hold the reset button in the RESET hole. Do not let go â–¼

3, plug in the power plug, wait for power, release the pin â–¼

4, PPBOX 4K box will automatically enter the system upgrade, "do not power off," wait patiently

5, after the upgrade is complete, the remote control Bluetooth pairing, and press the boot to do the appropriate settings to â–¼

3 PPBOX mini box factory reset

Specific steps
1, first disconnect PPBOX mini box power plug â–¼

2. While holding the power plug, hold down the "OK" button on the PPBOX mini box's remote control, and "Continuously" click on the Clover button, that is, "play module switching button" of the remote control. â–¼

"Clover Key" is here oh

3, about 10 seconds, PPBOX mini box into the system update, release the "OK" button and "shamrock" button, during the update "do not power off" â–¼

4. After the update is completed, the PPBOX mini box will restart automatically. The first time the power is turned on is slow, please wait patiently. â–¼

To restore the factory operation is as simple as the above steps, pay attention to the "do not power off" during the system update process.

The above method of restoring the factory is only applicable to users with various problems in the process of using the device. Individual users who want to return to the old version after upgrading the new system do not need this operation temporarily. Contact the customer service to obtain the installation package of the old version and install it directly.

After the restoration is completed, the sofa butler application market is directly installed, and various live broadcasts and on-demand applications are downloaded for free.

installation method:

Wukong remote control installation sofa butler tutorial First of all to ensure that your smart TV or box is turned on, while the mobile phone, box, to the same LAN, mobile phone connection WIFI, TV, box can link WIFI can also link network cable.
The first step is to directly download and download the Goku remote control from an Android phone using a browser. Apple iPhone is used to download and install Goku remote control in the Apple App Store.
The second step is to keep your mobile phone and smart TV or box in the same LAN, turn on Goku, search your TV or box.
The third step, searching for your TV or box, will perform an initialization process. This process is the process of installing the Goku TV remote control to the smart TV or the box.
The fourth step, the initialization is successful, will automatically jump to the remote control interface.
The fifth step, click on the TAB tab at the bottom to switch to the application center, which includes a lot of application selection and management. There are a large number of live broadcasts in the selection, on-demand software for you to download. Find your favorite software and click on the right to download it to the TV button to download and install. Click the Open button to start the application you have installed on your TV.
The sixth step, if you do not want to directly download the on-demand on-demand software, or if you think too little is optional, then you can search for the sofa butler in the mobile terminal Wukong remote control, choose to download and install, will be remotely pushed to your smart TV Or in the box. There is a sofa butler in the TV or box to download your favorite live broadcast on demand software from inside.
In summary, if you see this step, it means that you have successfully downloaded the software you want. I am here to congratulate you! ! ! ! ! !