With the increasing awareness of environmental protection, today's homes have also begun to promote "green lighting", and people began to respond to the call for energy conservation. “Green lighting†refers to the use of scientific lighting design, using high-efficiency, long-life, safe and stable lighting electrical products to improve the conditions and quality of people's work, study and life. However, if the design is not good, high-quality lighting equipment can not play the most effective role.
â– Pay attention to the choice of lamp power
Safety always starts with the most basic elements. The light bulb is a commonly used electric light source in the home, and whether the power selection is appropriate is directly related to the lighting effect.
First, consider the relationship between room space and lighting effects. Soft, clear lighting depends on the cooperation of the lampshade and the light bulb. The intensity of the light bulb will affect people's visual effects, vision protection and physical and mental health.
Secondly, considering the room space and the brightness of the illumination, the power of the bulb is too large to waste electric energy, and it is easy to generate heat, which may cause various accidents; the power can be selected too small, and the better lighting effect is not achieved. Can refer to the following standards: 15~18 square meters of lighting for 60~80 watts; 30~40 square meters for 100~150 watts; 40~50 square meters for 220~280 watts; 60~70 square meters for 300~350 Tile; 75~80 square meters in 400~450 watts.
Usually the lighting of the bathroom is 2 watts per square meter; the restaurant and kitchen are enough for 4 watts per square meter, while the study and living room are larger, 8 watts per square meter; the desk lamps on the desk and bedside table can be 15 to 60 The bulb of the tile should not exceed 60 watts.
â– Use a sensible attitude to select lamps
The beauty of the lamps is very important, and the beautifully colored and well-shaped lamps can bring pleasure to people. Since the lighting fixture is an organic component of the entire living room decoration, its style, material and illuminance should be consistent with the indoor function and decorative style, and the lighting fixtures should be purchased according to this principle.
However, for the light source (bulb tube), it is necessary to scientifically purchase the lighting according to the function of each part of the living room. Because the effect of the light source not only restricts the lighting effect in the home, but more importantly, there are still safety problems, so it is recommended that you choose some excellent brands when purchasing the light bulb.
Editor: China Lighting Network Pony
This series can connect two Driver Unit,so it is more powerful, not easy to burn out ,this driver unit connector is made of all-aluminum material, firm and wear-resistant, anti-freeze and anti-pressure, durable, , easy to install, long service life is also its strong point.it can also be used for HS200-02.
Driver Unit connector,Driver Unit Y Adapter,Compression Driver Y Adapter,Aluminum Y Adapter
Taixing Minsheng Electronic Co.,Ltd. , https://www.msloudspeaker.com