“Statistical analysis method of spare parts†means to perform technical statistical analysis according to a large number of spare parts consumption data or repair and replacement schedules, find out the rules of wear and consumption of spare parts, and determine the types and quantities of spare parts reserves.
Wedge Prism can be used to deflect the laser beam at a certain angle alone, or combine the two together as beam deflection application. A single prism can offset the incident beam by a certain angle. If measured by diopter, it is a diopter, which is equivalent to an offset of 1cm at a distance of 1m
Ø can be used for beam deflection
Ø 0.5 ° - 15 ° beam deflection
Ø products without coating or antireflection coating are available
In addition, irregular prism pairs are also provided
Wedge prism can be used to deflect the laser beam at a certain angle alone, or combine the two together as beam deflection application. A single prism can offset the incident beam by a certain angle. If measured by diopter, it is a diopter, which is equivalent to an offset of 1cm at a distance of 1m
Two can be used as deformable prisms (to correct the elliptical beam output by the laser tube), or to set the beam at 4 θ Deflect at various angles within the range, θ It refers to the light deflected by a single prism. This beam shaping is realized by rotating two beams respectively, which is typically used to scan different positions in imaging.
Wedge Optical Window
Hanzhong Hengpu Photoelectric Technology Co.,Ltd , https://www.hplenses.com