Rubber shock pad specification model:
Common models are rectangular 300mm, 350mm, 400mm, 450mm height 50mm etc.
Rubber shock pad specification model: rectangular, round products.
Material: natural rubber, neoprene.
Scope of application: construction, mechanical isolation shock absorption.
Rubber shock absorber products are also commonly referred to as rubber shock absorbers. There are many types of rubber shock absorbing pads, and from the point of view of the vibration force, they can be classified into compression type, shear type, torsional vibration type, impact type, and hybrid type. With the development of science and technology, there are more and more types of rubber shock absorbers, and the use of rubber shock absorbers is becoming wider and wider. The development and application prospects of rubber shock absorber pads are summarized in the following.
The rubber shock absorbing pad is made by laminating multiple layers of rubber sheets. With sufficient vertical stiffness to bear the vertical load, the reaction force of the upper structure is reliably transmitted to the abutment with good elasticity to adapt to the rotation of the beam end; there is a larger shear deformation to meet the horizontal displacement of the upper structure. The rubber shock absorbing pad has been widely used in bridge construction, hydropower engineering, and house anti-seismic facilities, and has the advantages of simple structure, easy installation, economical steel, low price, simple maintenance, easy replacement, and low damping rubber pad construction height It is beneficial to the design of bridges and lowering the cost of construction; it has a good isolation effect and can reduce the impact of live loads and seismic forces on buildings.
In the bridge project, bearings need to be set at both ends of the beam bridge span. The main function of the bearing is to reliably transmit all loads (including dead load and live load) on the span structure to the pier, and to withstand deformation of the end of the bridge span structure such as horizontal displacement and rotation angle; The second is to adapt to the shrinkage caused by changes in temperature and humidity. There are two kinds of fixed and movable bearings for bridge bearings. The former is the position of the fixed span structure on the pier, which allows the ends of the span structure to rotate freely and cannot move; the latter not only enables the free rotation of the end fulcrum but also requires It can move freely and withstand the expansion and contraction caused by temperature change, concrete shrinkage and load and other factors of bridge span structure.
The above is the specifications of rubber shock absorber pads introduced by Hengshui Yifeng Technology Co., Ltd. We hope this information can help you. If you also want to know more products and prices of our company, you can contact .13785855258 Pay (WeChat same number) to pay the manager
Optical Rotary Sensor,Custom Encoder,Optical Encoder 6Mm Shaft,Handwheel Pulse Generator
Jilin Lander Intelligent Technology Co., Ltd , https://www.jllandertech.com