The smart home is essentially defined as a system, which is a collection of home intelligent devices, and smart door locks are among the more important devices.
System intelligence is obviously the best intelligence, both for manufacturers and consumers, but the current industry entry point and breakthrough point can only be a few products in the system, as well as for manufacturers and consumers. . For the time being, the entry-level products of smart homes are neither routers nor cameras, but smart door locks.
Not long ago, at the CHINA IoT Summit WULIAN New Product Launch Conference and Global Cooperation Conference, Nanjing IOT released a smart door lock WU-Lock Crown Plus . According to reports, WU-Lock Crown Plus integrates a smart camera, smart cat's eye and smart doorbell, which can be described as a multi-function set, further enhancing security and convenience, different from traditional electronic locks and network locks.
In fact, since 2017 , smart door locks have been the hottest products outside of smart speakers. On the one hand, more enterprises have deployed smart door locks, in addition to the early layout of smart home manufacturers such as Nanjing IOT, as well as Haier, ZTE, Xiaomi, Philips, Hikvision and other giants.
On the other hand, driven by the concept of smart home, more consumers are awakened, and it is an inevitable trend to clear the more practical door locks to be intelligent. According to relevant survey statistics, the total shipment volume of smart door locks in China in 2016 was 5 million, and at least doubled in 2017 to 10 million.
However, behind the hot door locks, another problem arises: the "smart" concept of smart door locks is generalized and essentially degraded. Simply put, many so-called smart door locks on the market are not even intelligent. At best, they are electronic locks that are a bit higher than traditional mechanical locks. They can be said to be "pseudo-intelligent" door locks.
"Many of the smart door locks in the moment are just the intelligent concept of the edge ball, too much emphasis on unlocking methods, such as cell phone unlocking, virtual passwords, more accurate fingerprint unlocking, etc., deviating from the intelligent channel. In our opinion, the smart door lock should have Some anthropomorphic functions.†Zhu Lanzhou, head of the Nanjing IOT Qingdao Operations Center, who was invited to attend the China IoT Summit Forum, said at the forum.
What are the functions of most current smart door locks? A summary of the following points:
1 , a variety of unlocking methods, different from the previous fingerprint lock and password lock, the addition of a mobile phone unlock (near-field Bluetooth and WiFi remote), especially mobile phone remote, by many people default to determine the first element of smart door lock ; 2, unlock records, that is, each time the lock will leave records to facilitate traceability, query, and control routines for the elderly and children, to see if they return home and so on; 3, alarm, mainly for violent destruction, usually local Alarm and remote message reminders.
Zhu Lanzhou also said that the function of the real smart door lock is different from the electronic locks seen in some markets. In addition to various unlocking methods, it should also have networking, perception, especially video calls and even artificial intelligence. “When a stranger stays in front of the house for more than the set time, the door lock will be captured and passed to our mobile phone. Let us know the abnormal situation for the first time.â€
With the introduction of the Internet of Things and artificial intelligence technology, the door lock is expected to achieve further leap-forward development, and the electronic door locks really enter the era of smart door locks. Nanjing IOT's new smart door lock WU-Lock Crown Plus redefines the smart door lock, which has been revolutionized in appearance and function, and is expected to drive the advancement of the smart door lock industry.
40V DC Electronic Load have multiple options for different power.Full protection includings OCP, OPP, OTP, over voltage and reverse alarm. Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. The DC electronic load provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing.
If 40V is too little voltage for you, we also have higher options for 200V DC Electronic Load, 600V DC Electronic Load and 1200V DC Electronic Load.
Kindly check below special features for your reference:
â— Flippable front panel and color touch screen allow convenient access and operation
â— Provides four kinds of basic working mode such as CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
â— Adjustable current slew rate, adjustable CV loop speed
â— Ultra high precision voltage & current measurement
â— OCP/OPP testing function
â— 50kHz high-speed CC/CR dynamic mode
â— 500kHz high-speed voltage and current sampling rate
â— Timing & discharging measurement for batteries
â— Short circuit test mode
â— Auto mode function provides an easy way to do complicated test
â— Dynamic frequency sweep function for determining worst case voltage peaks*
â— Non linear load mode function makes the simulated loading current more realistic*
â— Supports external analog control function*
â— V-monitor/I-monitor
â— LED load simulation function
â— Full protection: OCP, OPP, OTP, over voltage and reverse alarm
â— Up to 20 units master/slave parallel control
â— Front panel USB interface supports data import and export
â— SCPI language and standard rack size make it ideal for ATE System integration
â— Smart fan control with lower noise and better for environment
â— Multi versions to meet the cost performance and different applications
* Only professional Electronic Load units support these functions
40V DC Electronic Load,programmable electronic load,programmable dc electronic load,high power DC electronic load
APM Technologies Ltd , https://www.apmpowersupply.com