For the rapid processing method in the tuning process 1, the microphone is dry, singing tired:
Reason: The IF energy of the microphone is not enough; the solution: increase the 800Hz frequency band;
2, bass hard:
Reason: The upper limit energy of the subwoofer is too strong; the solution: attenuation 125-160Hz;
3, bass dispersion:
Cause: The low frequency lower limit energy is too large; solution: increase the subwoofer lower limit frequency;
4, bass mixing:
Cause: The low frequency center frequency energy is too strong; the solution: attenuation 60-80Hz;
5, the sound is thin, or the sound is dry:
Cause: The medium and low frequency energy is insufficient; the solution: increase 250Hz;
6, the sound hit the ear:
Cause: The intermediate frequency is too strong; the solution: attenuation IK-1.25KHz;
7, sound fried:
Cause: The medium and high frequency energy is too strong; the solution: attenuation 2K-4KHz;
8, the sound is harsh:
Cause: The high frequency energy is too strong; the solution: attenuation 6KHz;
9, the voice is irritating:
Cause: The high frequency is not compliant; solution: attenuation 8K-1 OKHz;
10, the sound hairy:
Reason: The ultra-high frequency energy is too strong; the solution: attenuation 12K-16KHz;
11, feeling high, medium and low frequency disconnect:
Cause: The frequency band near the frequency dividing frequency is excessively attenuated; Solution: Increase the balance near the frequency dividing frequency and increase the degree of convergence;
12, the combination of sensory microphone and accompaniment music is not good:
the reason:
1 The ratio of microphone to music is wrong;
2 The effect of the pre-delay parameter is incorrect;
Solution:
1 readjust the ratio of microphone to music at 6:4;
2 reduce the effect pre-delay time;
13. Feel the lack of flexibility in the bass.
Cause: The subwoofer is not coordinated; the solution is to attenuate the frequency close to the lower limit of 40 Hz or 50 Hz, and raise the reference frequency band by 80 Hz;
14, the voice is not clear enough:
Reason: The low frequency is too fat; the solution: attenuation 300-500Hz;
Reason: The IF energy of the microphone is not enough; the solution: increase the 800Hz frequency band;
2, bass hard:
Reason: The upper limit energy of the subwoofer is too strong; the solution: attenuation 125-160Hz;
3, bass dispersion:
Cause: The low frequency lower limit energy is too large; solution: increase the subwoofer lower limit frequency;
4, bass mixing:
Cause: The low frequency center frequency energy is too strong; the solution: attenuation 60-80Hz;
5, the sound is thin, or the sound is dry:
Cause: The medium and low frequency energy is insufficient; the solution: increase 250Hz;
6, the sound hit the ear:
Cause: The intermediate frequency is too strong; the solution: attenuation IK-1.25KHz;
7, sound fried:
Cause: The medium and high frequency energy is too strong; the solution: attenuation 2K-4KHz;
8, the sound is harsh:
Cause: The high frequency energy is too strong; the solution: attenuation 6KHz;
9, the voice is irritating:
Cause: The high frequency is not compliant; solution: attenuation 8K-1 OKHz;
10, the sound hairy:
Reason: The ultra-high frequency energy is too strong; the solution: attenuation 12K-16KHz;
11, feeling high, medium and low frequency disconnect:
Cause: The frequency band near the frequency dividing frequency is excessively attenuated; Solution: Increase the balance near the frequency dividing frequency and increase the degree of convergence;
12, the combination of sensory microphone and accompaniment music is not good:
the reason:
1 The ratio of microphone to music is wrong;
2 The effect of the pre-delay parameter is incorrect;
Solution:
1 readjust the ratio of microphone to music at 6:4;
2 reduce the effect pre-delay time;
13. Feel the lack of flexibility in the bass.
Cause: The subwoofer is not coordinated; the solution is to attenuate the frequency close to the lower limit of 40 Hz or 50 Hz, and raise the reference frequency band by 80 Hz;
14, the voice is not clear enough:
Reason: The low frequency is too fat; the solution: attenuation 300-500Hz;
Power Cable,Power Cord,Vfd Cable,Armor Power Cable
Baosheng Science&Technology Innovation Co.,Ltd , https://www.bscables.com